On October 21st, the conference MURANO 3D: INNOVAZIONE E SOSTENIBILITA’ PER IL VETRO ARTISTICO took place in the amazing venue of the Barovier & Toso artisan glassmaking factory in Murano, Venice. Prof. Paolo Colombo and Dr Filippo Gobbin presented the results of the D3Vero project, POR FESR 2014 – 2020 az. 1.1.4, and the prospective of…
Read more
Last week (25th to 27th of September 2024), the 9th Shaping Conference took place in Warsaw, Poland. Our post-docs Dr. Filippo Gobbin and Dr. Anna De Marzi took an active part at the conference by presenting their works during the oral and poster presentations! And look at the picture..they also found some old company!
Between the 1st and the 6th of September 2024, the 22nd international Sol-Gel conference took place in Berlin, Germany. Prof. Paolo Colombo, alongside our post-doc Dr. Alice Zanini, presented their works!
During the past week – from the 6th to the 8th of May 2024 – the CerAMglass delegation took an active part at the yCAM2024 in Tampere, Finland! They also had the chance to meet up with some old friends, Andy Gleadall – participating as an invited speaker at the conference talking about his FullControl…
Read more
Last week (28th January to 2nd of February 2023), the 48th International Conference and Exposition on Advanced Ceramics and Composites (ICACC) took place at the Hilton Daytona Beach Resort and Ocean Center in Daytona Beach, Florida. Prof. Paolo Colombo, Enrico Bernardo, Lisa Biasetto, and Giorgia Franchin presented their works, alongside to our post-doc and Ph.D. students…
Read more
We are happy to announce that yCAM 2024 will take place from the 6th to the 8th of May 2024 at the University of Tampere, Finland! Since its first edition in 2016, the scope of yCAM has been to provide a place for open and honest discussions, combining high-quality scientific presentations with a fresh and informal…
Read more
From the 6th to the 8th of December 2023, it will take place the 1st international Workshop dedicated to ceramic additive manufacturing for biomedical applications (BioCAM2023). BioCAM is jointly organized by the Belgian Ceramic Research Centre (BCRC) and the European Ceramic Society (ECerS), with the support of the EMC (Additive Manufacturing) and Bioceramics ECerS Networks and of…
Read more
During the past week – from the 30th of August to the 1st of September – the CerAMglass delegation took an active part at the yCAM2023 in Leoben, Austria! Thanks to all for the nice time spent together and congrats to the presenters!
We, the many! The CerAMglass Research Group actively took part at the XVIII Conference & Exhibition of the European Ceramic Society hosted in Lyon, France from the 2nd to the 6th of July! Congrats to both oral and poster presenters and thanks to all for the great time spent together!
From the 19th to the 21st of June 2023, it will take place the 9th International conference on Material Science & Smart Materials (MSSM23). The purpose of this conference on Materials Science and Smart Materials is to provide a forum for both researchers and practitioners around the world to present papers on recent developments in…
Read more
The 98th Annual Conference of the Deutsche Keramische Gesellschaft (DKG), CERAMICS 2023, will take from March 27th to 30th at the Ernst-Abbe-Hochschule Jena (EAH Jena). The Italian ceramic community is involved in the organization as a conference partner of this edition and Prof. Paolo Colombo, Dr. Giorgia Franchin and Dr. Hamada Elsayed will take part and…
Read more
The newly presented yCAM team (including former PhD student Anna De Marzi) is happy to announce that yCAM 2023 will take place from 30th August to 1st September 2023 at the University of Leoben, Austria! yCAM is a symposium and a forum on Additive Manufacturing of Ceramics dedicated to young scientists. yCAM is an initiative…
Read more
Starting this Sunday and following to the next week (22nd to 27th of January 2023), the the 47th International Conference and Exposition on Advanced Ceramics and Composites (ICACC) will take place at the Hilton Daytona Beach Resort and Ocean Center in Daytona Beach, Florida. Prof. Paolo Colombo and Enrico Bernardo will present their works as well as Dr Giorgia Franchin and…
Read more
During the past week – from the 9th to the 11th of November – the CerAMglass delegation took an active part at the yCAM22 in Barcelona, Spain! Thanks to all for the nice time spent together and congrats to the presenters! Scroll down to take a look at their works.
In two weeks (14-16 Sept.2022) the 8th Shaping Conference will take place in Dübendorf, Switzerland. The conference will be preceded (13-14 Sept. 2022) by the “A swiss knife for ceramics shaping: Between fiction, hope and vision” Summer School. The CerAMglass Research Group will be represented by Dr Franchin who will actively participate not only as lecturer at…
Read more
From 24th to 29th of July 2022, the Solgel 2022 took place in Lyon, France. Dr Giorgia Franchin, actively participated as invited speaker during the 3D printing symposium.
The CerAMglass research group conquered Poland! During the past week, 10th to 14th July, we were present at the Ceramics in Europe 2022 hosted in Kraków. Congrats to both oral and poster presenters and thanks to all for the great time spent together!
During the past week, from 20th to 24th of June 2022, the 2022 CIMTEC took place in Perugia, Italy. The CerAMglass Research Group delegation represented by Prof. Colombo and Bernardo, and Dr Franchin, Elsayed and Gobbin, actively participated as speakers.
The 8th Shaping Conference will be organized jointly by the European Ceramic Society and the Swiss Federal Laboratories for Materials Science and Technology (Empa) in partnership with the Swiss Association for Materials Science and Technology, SVMT, from 14th to 16th September 2022 in Dübendorf/Zurich, Switzerland. The conference will focus on the advanced shaping processes applied to…
Read more
After two years of yCAM online, the yCAM team (including Dr Giorgia Franchin) is happy to announce an in-person yCAM 2022. The event will take place from 9th to 11th November 2022 at the University of Barcelona, Spain! yCAM is a symposium and a forum on Additive Manufacturing of Ceramics dedicated to young scientists. yCAM is…
Read more
The ACerS Italy Chapter is planning “Le mille vite del vetro” in Venice, Italy, on May 20, 2022, celebrating The International Year of Glass. This workshop (in Italian) is free and available to researchers, industries and students interested in glass science and technology. The aim is to bring innovative ideas on the use of glass out of…
Read more
Starting this Sunday and following to the next week (23rd to 28th of January 2022), the the 46th International Conference and Exposition on Advanced Ceramics and Composites (ICACC) will take place online. Prof. Paolo Colombo and Enrico Bernardo will present their works as well as Dr Giorgia Franchin and our PhD student Anna De Marzi.…
Read more
Formnext 2021 will take place from the 16th to 19th of November 2021 at Messe Frankfurt, in Frankfurt (Germany). Such event represents the world’s largest professional meeting point for additive manufacturing, bringing together thousands of 3D printers, products and innovations from from the aviation industry to small start-ups, the medical and automotive industries and even large…
Read more
The 2021 yCAM (young Ceramists Additive Manufacturing Forum) meet-up, co.organised by Dr Giorgia Franchin, will take place on gather.town on the 29th of October. This year virtual meeting is dedicated to the transition of ideas from research to industry. Take a look at the page event for more informations! The yCAM event will be held…
Read more
During the next days – from the 27th to the 29th of October – the 2nd International Conference on Progress in Digital and Physical Manufacturing (ProDPM’21) organized by the School of Technology and Management (ESTG) of the Polytechnic of Leiria (IPL), will take place online. Dr Giorgia Franchin will actively participate to the conference as…
Read more
Our PhD student, Giulio Giometti, partecipated at the ceramitec conference 2021 hosted in Munich, Germany, from the 15th to the 16th of September 2021.
During the following week – from the 15th to the 18th of September – the XVI National Convention of AIMAT (Associazione Nazionale Ingegneria dei Materiali) will take place at the Sa Manifattura (Cagliari, Italy). Dr Giorgia Franchin will actively participate to the conference as one of the speaker. Bonu viaggiu!
Our PhD students, Anna De Marzi and Useche Dos Santos Inchauspe, participated at the 13th edition of the Scuola di Reologia Industriale held from the 5th to the 9th of September in Valeggio sul Mincio (VR). Thanks to Dino Ferri, president of the Associazione Italiana di Reologia – SIR for the organisation of the school!…
Read more
During the following week – from the 25th to the 30th of April – the 8th International Congress on Ceramics (ICC8) will take place online. Our fellow Professor, Paolo Colombo, will participate as Organizer of the Additive Manufacturing of Ceramics and Associated Hybrid Printing Technologies Symposium, alongside with Dr Giorgia Franchin and Bai Yang, PhD…
Read more
Next week – from the 19th to the 21st of April 2021 – KERAMIK 2021, the 96th Annual Meeting of the Deutsche Keramische Gesellschaft (DKG / German Ceramic Society) will take place online. Dr Giorgia Franchin will actively participate as Invited Speaker of the Additive Manufacturing Session. Dir viel Spass!
In just a couple of weeks – starting from the 8th to the 12th of February – the 45th International Conference and Exposition on Advanced Ceramics and Composites (ICACC) will take place online. The online schedule of the conference is available here. The CerAMglass research group will be represented at the conference by its following…
Read more
The Materials Science & Technology 2020 Technical Meeting & Exhibition (MS&T20) was held virtually from 2-6 November 2020. Registrants watched live plenary and award sessions, visited the virtual exhibit hall, participated in multiple student events and contests, and had access to hundreds of on-demand technical presentations and posters. Congratulations to our PhD student Anna De…
Read more
The CerAMglass delegation is actively participating at the yCAM2020 Online Forum which is taking place from 28th to 30th of October in the gather.town world! Don’t know if it’s just the conference atmosphere, but this virtual interaction did not affect our enthusiasm at all!
During the following week – from the 24th to the 31st of January – the 44th International Conference and Exposition on Advanced Ceramics and Composites (ICACC) will take place at the Hilton Daytona Beach Oceanfront Resort (Daytona Beach, Florida, USA). Our fellow Professors, Paolo Colombo and Enrico Bernardo, will participate, as well as Dr Giorgia…
Read more
Our team, composed by Dr. Giorgia Franchin, PhD students Giulio Giometti and Anna De Marzi, and Prof.ssa Lisa Biasetto (from the Department of Management and Engineering of Vicenza), gathered up with UniSmart Padova at the VicenzaORO 2020 exhibition in order to present part of our work to the jewellery market. We shine bright like..glass!
Prof. Paolo Colombo participated actively – as Organizer of the Polymer Derived Ceramics (PDCs) and Composites Symposium – at the 13th Pacific Rim Conference of Ceramic Societies, hosted in Okinawa (Japan) from 27th of October to 1st of November 2019.. yoku yatta (よくやった)!
Dr. Giorgia Franchin participated actively – as Keynote Speaker on Additive Manufacturing – at the last International Conference on High Temperature Ceramic Matrix Composites hosted in Bordeaux from 22nd to 26th of September 2019. She’s in the picture below..can you spot her?
Our group, headed by Prof. Paolo Colombo – the General Chair of the Committee – participated at the XVI ECerS Conference hosted in Turin from 16th to 20th of June 2019. Thanks to our group for the great time spent together!
