Lista pubblicazioni dal 2020

1) Hammood, A.S., Esmailzadeh, M., Hosseini, S.N., Karimi, S., Calliari, I., Pezzato, L., Brittain, R.; Effect of Friction Stir Welding Parameters on Microstructure and Corrosion Behavior of 2101 Duplex Stainless Steel in Simulated Body Fluid (2023) International Journal of Precision Engineering and Manufacturing – Green Technology, 10 (2), pp. 327-337. DOI: 10.1007/s40684-022-00440-0

2) Polyakova, M., Konstantinov, D., Korchunov, A., Dabala’, M.; The Use the Concept of Multiscale Simulation to Improve the Topology of TRIP-Steel Parts Operating Under Extreme Loads (2023) Lecture Notes in Mechanical Engineering, pp. 196-206. DOI: 10.1007/978-3-031-14125-6_20

3) Franceschi, M., Bertolini, R., Fabrizi, A., Dabalà, M., Pezzato, L.; Effect of ausforming temperature on bainite morphology in a 3.2% Si carbide-free bainitic steel (2023) Materials Science and Engineering A, 864, art. no. 144553, DOI: 10.1016/j.msea.2022.144553

4) Pezzato, L., Colusso, E., Cerchier, P., Settimi, A.G., Brunelli, K.; Production and Characterization of Photocatalytic PEO Coatings Containing TiO2 Powders Recovered from Wastes (2023) Coatings, 13 (2), art. no. 411, DOI: 10.3390/coatings13020411

5) Mazzoleni, S., Gargani, A., Parcianello, R.G., Pezzato, L., Bertolini, R., Zuccon, A., Stellini, E., Ludovichetti, F.S.; Protection against Dental Erosion and the Remineralization Capacity of Non-Fluoride Toothpaste, Fluoride Toothpaste and Fluoride Varnish (2023) Applied Sciences (Switzerland), 13 (3), art. no. 1849, DOI: 10.3390/app13031849

6) Franceschi, M., Soffritti, C., Fortini, A., Pezzato, L., Garagnani, G.L., Dabalà, M.; Evaluation of wear resistance of a novel carbide-free bainitic steel (2023) Tribology International, 178, art. no. 108071, DOI: 10.1016/j.triboint.2022.108071

7) Faraji, M., Karimi, S., Esmailzadeh, M., Pezzato, L.; Investigation of the Microstructure and Corrosion Behaviors of Composite Hard-Faced Layers on Al5052 Using SiC and TiB2 in 3.5% NaCl and 0.5 M H2SO4 Solutions (2023) Journal of Materials Engineering and Performance, DOI: 10.1007/s11665-023-07807-7

8) Faraji, M., Karimi, S., Esmailzadeh, M., Pezzato, L., Calliari, I., Eskandari, H.; The Electrochemical and Microstructure Effects of TiB2 and SiC Addition to AA5052/Al2O3 Surface Composite Coatings in 0.5 M H2SO4 Solution (2022) Journal of Bio- and Tribo-Corrosion, 8 (4), art. no. 117, DOI: 10.1007/s40735-022-00716-7

9) Khademzadeh, S., Gennari, C., Zanovello, A., Franceschi, M., Campagnolo, A., Brunelli, K.; Development of Micro Laser Powder Bed Fusion for Additive Manufacturing of Inconel 718 (2022) Materials, 15 (15), art. no. 5231, DOI: 10.3390/ma15155231

10) Yazdanpanah, A., Pezzato, L., Dabalà, M.; Stress corrosion cracking of AISI 304 under chromium variation within the standard limits: Failure analysis implementing microcapillary method (2022) Engineering Failure Analysis, 142, art. no. 106797, DOI: 10.1016/j.engfailanal.2022.106797

11) da Cruz Junior, E.J., Seloto, B.B., Ventrella, V.A., Settimi, A.G., Gennari, C., Calliari, I., Zambon, A.;
Addition of Nickel by the Watts Bath as a Way to Correct the Phase Balance on Nd:YAG Pulsed-Laser-Welded UNS S32750 (2022) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 53 (1), pp. 25-28. DOI: 10.1007/s11661-021-06521-0

12) Pezzato, L., Gennari, C., Franceschi, M., Brunelli, K.; Influence of silicon morphology on direct current plasma electrolytic oxidation process in AlSi10Mg alloy produced with laser powder bed fusion (2022) Scientific Reports, 12 (1), art. no. 14329, DOI: 10.1038/s41598-022-18176-x

13) Yazdanpanah, A., Franceschi, M., Bergamo, G., Bonesso, M., Dabalà, M.; On the exceptional stress corrosion cracking susceptibility of selective laser melted 316L stainless steel under the individual effect of surface residual stresses (2022) Engineering Failure Analysis, 136, art. no. 106192, DOI: 10.1016/j.engfailanal.2022.106192

14) Pezzato, L., Settimi, A.G., Fanchin, D., Moschin, E., Moro, I., Dabalà, M.; Effect of Cu Addition on the Corrosion and Antifouling Properties of PEO Coated Zinc-Aluminized Steel (2022) Materials, 15 (22), art. no. 7895, DOI: 10.3390/ma15227895

15) Gupta, A.K., Priyadarshi, S., Pustovoytov, D., Dabala, M., Yu, H., Pesin, A., Tandon, P.; Effects of Heat Treatment on the Surface Quality and Improvement in Formability of Deformation Machined Products of Al 6061 (2022) Journal of Manufacturing Science and Engineering, 144 (12), art. no. 124501, DOI: 10.1115/1.4054991

16) Esmailzadeh, M., Mousavi, R., Esfahani, M.M., Pezzato, L., Karimi, E.; Effect of cold forging on mechanical and corrosion behaviors of carbon steel plate (2022) International Journal of Pressure Vessels and Piping, 198, art. no. 104659, DOI: 10.1016/j.ijpvp.2022.104659

17) Gorlenko, D.A., Konstantinov, D.V., Polyakova, M.A., Dabalá, M.;TRIP steels: the features of chemical composition and structure, prospects of application (overview) (2022) CIS Iron and Steel Review, 23 (1), pp. 67-75. DOI: 10.17580/cisisr.2022.01.13

18) Cortese, E., Galenda, A., Famengo, A., Cappellin, L., Roverso, M., Settimi, A.G., Dabalà, M., De Stefani, D., Fassina, A., Serianni, G., Antoni, V., Navazio, L.; Quantitative Analysis of Plant Cytosolic Calcium Signals in Response to Water Activated by Low-Power Non-Thermal Plasma
(2022) International Journal of Molecular Sciences, 23 (18), art. no. 10752, DOI: 10.3390/ijms231810752

19) Yazdanpanah, A., Franceschi, M., Revilla, R.I., Khademzadeh, S., De Graeve, I., Dabalà, M.;Revealing the stress corrosion cracking initiation mechanism of alloy 718 prepared by laser powder bed fusion assessed by microcapillary method (2022) Corrosion Science, 208, art. no. 110642, DOI: 10.1016/j.corsci.2022.110642

20) Zurnadzhy, V., Efremenko, V., Petryshynets, I., Dabalà, M., Franceschi, M., Wu, K., Kováč, F., Chabak, Y., Puchy, V., Brykov, M.; Alternative Approach for the Intercritical Annealing of (Cr, Mo, V)-Alloyed TRIP-Assisted Steel before Austempering (2022) Metals, 12 (11), art. no. 1814, DOI: 10.3390/met12111814

21) Ludovichetti, F.S., Lucchi, P., Zambon, G., Pezzato, L., Bertolini, R., Zerman, N., Stellini, E., Mazzoleni, S.; Depth of Cure, Hardness, Roughness and Filler Dimension of Bulk-Fill Flowable, Conventional Flowable and High-Strength Universal Injectable Composites: An In Vitro Study (2022) Nanomaterials, 12 (12), art. no. 1951, DOI: 10.3390/nano12121951

22) Kostelac, L., Pezzato, L., Settimi, A.G., Franceschi, M., Gennari, C., Brunelli, K., Rampazzo, C., Dabalà, M.; Investigation of hydroxyapatite (HAP) containing coating on grade 2 titanium alloy prepared by plasma electrolytic oxidation (PEO) at low voltage (2022) Surfaces and Interfaces, 30, art. no. 101888, DOI: 10.1016/j.surfin.2022.101888

23) Ludovichetti, F.S., Zambon, G., Cimolai, M., Gallo, M., Signoriello, A.G., Pezzato, L., Bertolini, R., Mazzoleni, S.; Efficacy of Two Toothpaste in Preventing Tooth Erosive Lesions Associated with Gastroesophageal Reflux Disease (2022) Applied Sciences (Switzerland), 12 (3), art. no. 1023, DOI: 10.3390/app12031023

24) Sabia, G., Tammaro, M., Cerchier, P., Salluzzo, A., Brunelli, K.;
Treatment and management of the effluents generated by hydrometallurgical processes applied to End-of-Life Photovoltaic Panels (2022) Journal of Water Process Engineering, 47, art. no. 102814,
DOI: 10.1016/j.jwpe.2022.102814

25) Settimi, A.G., Pezzato, L., Longato, A., Brunelli, K., Martucci, A., Gross, S., Dabalà, M.; Photoluminescent Plasma Electrolytic Oxidation Coatings Containing YAG: Ce Produced on 1050 Aluminum Alloy (2022) Journal of Materials Engineering and Performance, DOI: 10.1007/s11665-022-07523-8

26) Azmi, S., Layachi, O.A., Ouardi, M.E., Khoumri, E.M., Moujib, A., Brouzi, A.E., Nohair, M., Pezzato, L., Dabala, M.; Growth of Cu2ZnSnS4 thin film absorber layer on transparent conductive oxides and molybdenum substrates by electrodeposition for photovoltaic application (2022) Optik, 250, art. no. 168320, DOI: 10.1016/j.ijleo.2021.168320

27) Pezzato, L., Lorenzetti, L., Tonelli, L., Bragaggia, G., Dabalà, M., Martini, C., Brunelli, K.; Effect of SiC and borosilicate glass particles on the corrosion and tribological behavior of AZ91D magnesium alloy after PEO process (2021) Surface and Coatings Technology, 428, art. no. 127901, DOI: 10.1016/j.surfcoat.2021.127901

28) Franceschi, M., Bettanini, A.M., Pezzato, L., Dabalà, M., Jacques, P.J.; Effect of multi-step austempering treatment on the microstructure and mechanical properties of a high silicon carbide-free bainitic steel with bimodal bainite distribution (2021) Metals, 11 (12), art. no. 2055, DOI: 10.3390/met11122055

29) Cerchier, P., Brunelli, K., Pezzato, L., Audoin, C., Rakotoniaina, J.P., Sessa, T., Tammaro, M., Sabia, G., Attanasio, A., Forte, C., Nisi, A., Suitner, H., Dabalà, M.; Innovative recycling of end of life silicon pv panels: Resielp (2021) Detritus, 16, pp. 41-47. DOI: 10.31025/2611-4135/2021.15118

30) Stolyarov, V., Calliari, I., Gennari, C; Features of the interaction of plastic deformation and pulse current in various materials (2021) Materials Letters, 299, art. no. 130049, DOI: 10.1016/j.matlet.2021.130049

31) Rebesan, P., Gennari, C., Zorzi, F., Bonesso, M., Calliari, I., Dima, R., Pepato, A., Vedani, M.;
Interface analysis of additively manufactured pure molybdenum and AISI 304 stainless steel building-plate (2021) Materials Letters, 305, art. no. 130763, DOI: 10.1016/j.matlet.2021.13076

32) Bertolini, R., Simonetto, E., Pezzato, L., Fabrizi, A., Ghiotti, A., Bruschi, S.; Mechanical and corrosion resistance properties of AA7075-T6 sub-zero formed sheets (2021) International Journal of Advanced Manufacturing Technology, 115 (9-10), pp. 2801-2824. DOI: 10.1007/s00170-021-07333-7

33) da Cruz Junior, E.J., Gallego, J., Settimi, A.G., Gennari, C., Zambon, A., Ventrella, V.A.; Influence of Nickel on the Microstructure, Mechanical Properties, and Corrosion Resistance of Laser-Welded Super-Duplex Stainless Steel (2021) Journal of Materials Engineering and Performance, 30 (4), pp. 3024-3032 DOI: 10.1007/s11665-021-05590-x

34) Yazdanpanah, A., Lago, M., Gennari, C., Dabalà, M.; Stress corrosion cracking probability of selective laser melted 316l austenitic stainless steel under the effect of grinding induced residual stresses (2021) Metals, 11 (2), art. no. 327, pp. 1-20. DOI: 10.3390/met11020327

35) Gennari, C., Forzan, M., Gobbo, R., Bruschi, S., Stolyarov, V., Calliari, I.; Electrically enhanced plasticity of duplex stainless steel UNS S32750 (2021) Materials Letters, 304, art. no. 130680, DOI: 10.1016/j.matlet.2021.130680

36) Logori, D., Pezzato, L., Settimi, A.G., Hanoz, D., Dabalà, M.; Microstructural and corrosion properties of burnished 6060 aluminum alloy (2021) Applied Sciences (Switzerland), 11 (10), art. no. 4460, DOI: 10.3390/app11104460

37) Faleschini, F., Toska, K., Zanini, M.A., Andreose, F., Settimi, A.G., Brunelli, K., Pellegrino, C.; Assessment of a municipal solid waste incinerator bottom ash as a candidate pozzolanic material: Comparison of test methods (2021) Sustainability (Switzerland), 13 (16), art. no. 8998,
DOI: 10.3390/su13168998

38) Pigato, M., Pezzato, L., Cason, C., Dabalà, M.; Development of Thermomechanical Processes as an Alternative to Grain Refiners in 18 Carat Gold Alloys (2021) Journal of Materials Engineering and Performance, 30 (4), pp. 2680-2690. DOI: 10.1007/s11665-021-05644-0

39) Pezzato, L., Brunelli, K., Diodati, S., Pigato, M., Bonesso, M., Dabalà, M.; Microstructural and corrosion properties of hydroxyapatite containing peo coating produced on az31 mg alloy (2021) Materials, 14 (6), art. no. 1531, DOI: 10.3390/ma14061531

40) Hanoz, D., Settimi, A.G., Pezzato, L., Dabala, M.; Effect of Precipitation Hardening on Corrosion Resistance of Cu-4.5 wt.%Ti (2021) Journal of Materials Engineering and Performance, 30 (2), pp. 1306-1317. DOI: 10.1007/s11665-020-05353-0

41) Franceschi, M., Pezzato, L., Settimi, A.G., Gennari, C., Pigato, M., Polyakova, M., Konstantinov, D., Brunelli, K., Dabalà, M.; Effect of different austempering heat treatments on corrosion properties of high silicon steel (2021) Materials, 14 (2), art. no. 288, pp. 1-17. DOI: 10.3390/ma14020288

42) Ghiotti, A., Bertolini, R., Pezzato, L., Savio, E., Terzini, M., Bruschi, S.; Surface texturing to enhance sol-gel coating performances for biomedical applications (2021) CIRP Annals, 70 (1), pp. 459-462. DOI: 10.1016/j.cirp.2021.04.040

43) Cortese, E., Settimi, A.G., Pettenuzzo, S., Cappellin, L., Galenda, A., Famengo, A., Dabalà, M., Antoni, V., Navazio, L.; Plasma-activated water triggers rapid and sustained cytosolic Ca2+ elevations in arabidopsis thaliana (2021) Plants, 10 (11), art. no. 2516, DOI: 10.3390/plants10112516

44) Salviulo, G., Lavagnolo, M.C., Dabalà, M., Bernardo, E., Polimeno, A., Sambi, M., Bonollo, F., Gross, S.; Enabling Circular Economy: The Overlooked Role of Inorganic Materials Chemistry
(2021) Chemistry – A European Journal, 27 (22), pp. 6676-6695.DOI: 10.1002/chem.202002844

45) Yazdanpanah, A., Biglari, F.R., Fallahi Arezoodar, A., Dabalà, M.; Role of grinding induced surface residual stress on probability of stress corrosion cracks initiation in 316L austenitic stainless steel in 3.5% sodium chloride aqueous solution (2021) Corrosion Engineering Science and Technology, 56 (1), pp. 81-92. DOI: 10.1080/1478422X.2020.1812818

46) Pezzato, L., Dabalà, M., Gross, S., Brunelli, K.; Effect of microstructure and porosity of AlSi10Mg alloy produced by selective laser melting on the corrosion properties of plasma electrolytic oxidation coatings (2020) Surface and Coatings Technology, 404, art. no. 126477, DOI: 10.1016/j.surfcoat.2020.126477

47) Franceschi, M., Pezzato, L., Gennari, C., Fabrizi, A., Polyakova, M., Konstantinov, D., Brunelli, K., Dabalà, M.; Effect of intercritical annealing and austempering on the microstructure and mechanical properties of a high silicon manganese steel (2020) Metals, 10 (11), art. no. 1448, pp. 1-19. DOI: 10.3390/met10111448

48) Pezzato, L., Babbolin, R., Cerchier, P., Marigo, M., Dolcet, P., Dabalà, M., Brunelli, K.; Sealing of PEO coated AZ91magnesium alloy using solutions containing neodymium (2020) Corrosion Science, 173, art. no. 108741, DOI: 10.1016/j.corsci.2020.108741

49) Cerchier, P., Pezzato, L., Gennari, C., Moschin, E., Moro, I., Dabalà, M.; PEO coating containing copper: A promising anticorrosive and antifouling coating for seawater application of AA 7075 (2020) Surface and Coatings Technology, 393, art. no. 125774 DOI: 10.1016/j.surfcoat.2020.125774

50) Calliari, I., Breda, M., Gennari, C., Pezzato, L., Pellizzari, M., Zambon, A.; Investigation on solid-state phase transformations in a 2510 duplex stainless steel grade (2020) Metals, 10 (7), art. no. 967, pp. 1-12. DOI: 10.3390/met10070967

51) Calliari, I., Polyakova, M., Gulin, A., Lago, M., Gennari, C., Pezzato, L.; Effect of Deformational Processing on Microstructure and Corrosion Resistance of Medium Carbon Steel Wires (2020) Metallography, Microstructure, and Analysis, 9 (3), pp. 323-336. DOI: 10.1007/s13632-020-00642-5

52) Pezzato, L., Settimi, A.G., Cerchier, P., Gennari, C., Dabalà, M., Brunelli, K.; Microstructural and corrosion properties of PEO coated zinc-aluminized (ZA) steel (2020) Coatings, 10 (5), art. no. 448, DOI: 10.3390/COATINGS10050448

53) Pezzato, L., Gennari, C., Chukin, D., Toldo, M., Sella, F., Toniolo, M., Zambon, A., Brunelli, K., Dabalà, M.; Study of the effect of multiple tempering on the impact toughness of forged s690 structural steel (2020) Metals, 10 (4), art. no. 507, DOI: 10.3390/met10040507

54) Gennari, C., Pezzato, L., Tarabotti, G., Zambon, A., Di Schino, A., Calliari, I.; Influence of electropulsing treatments on mechanical properties of UNS S32750 duplex stainless steel (2020) Materials, 13 (7), art. no. 1613, DOI: 10.3390/ma13071613

55) Khademzadeh, S., Zanini, F., Rocco, J., Brunelli, K., Bariani, P.F., Carmignato,; Quality enhancement of microstructure and surface topography of NiTi parts produced by laser powder bed fusion (2020) CIRP Journal of Manufacturing Science and Technology, 31, pp. 575-582. DOI: 10.1016/j.cirpj.2020.08.009